RECONDITIONED Thermoformer MEAF BMS 600 with 10 cavity mould for Jogurt Cups

Thermoformer MEAF BMS 600 with 10 cavity mould for Jogurt Cups

RECONDITIONED in 2019

Maker: MEAF Machines B.V. – Холандия

Model:            BMS 600

Year:           2003

Reconditioned 2018. Year of Manufacture 2003.

Machine equipped with unwinding unit, with winding unit, stacking unit and used original MEAF 10 cavity mould.

Speed – 0 -30 cycle/min

Sheet width (PP) –     max. 630 mm

Sheet width (HIPS) – max. 670 mm

Forming width (PP) – max. 600 mm

Forming width (HIPS) – max. 640 mm

Transport length –        max. 250 mm

Plate size    – 928 x 196 mm

Stroke – 160 mm

Sheet thickness – 0.2 – 1.8 mm

The summary of new and reconditioned parts is as follows:

LOCON 16 – cam controller – new; MOTRONA CA306 data preset unit – new; Absolute encoder Deutschmann TA-58 -0360 – new;

HC block HETRONIK HC200-HN-12N23 – new; Photoelectric switch sensors OMRON E3B-D1U-G – 2 pcs – new;

Main Board for main motor inverter ELECTROINVENT – new; thermometers for WITTMANN water flow regulators – 6 pcs – new;

Sheet transport chains – 2 pcs – new, Stainless steel axial manometers – 3 pcs – new; Stainless steel axial vacuum-meters – 2 pcs – new;

Platinum water temperature sensors – 3 pcs – new; Ceramic heaters with Platinum water temperature sensors – 3 pcs -new;

LENZEXT EMZ9371BC keypad 1 pc. new /for LENZE 9300 VECTOR transport inverter/; FESTO plug position sensor – new;

Plug cylinder stem and sealing – new; Pneumatic directional valve for unwinding unit – new;

LENZE electric brakes for main motor – new; solenoid pneumatic valves – 2 pcs -new;

All sheet transport bearings – new; All hand valves on the machine – new;

All plastic tubes and hoses for water, compressed air and vacuum – new;

All copper and stainless steel blowing tubes – new;

Vacuum pump – reconditioned in the manufactures service workshop;

LENZE Transport inverter reprogrammed, motor and connections checked by the official Lenze service workshop;

CAM wheel set – reconditioned, Water flow regulator – reconditioned,

Air-coolers for both electric cabinets – reconditioned; Sheet transport roads – reconditioned;

Vacuum system – repaired, cleaned and checked; Compressed air system – repaired, cleaned and checked;

Water cooling system – repaired, cleaned and checked; Sheet heating installation – – repaired, cleaned and checked;

Machine frame – repaired, cleaned and painted in blue and white color.

MEAF 10 cavity used mould installed on the machine.

Machine electrically connected ready to be checked